E1701A modular analogue scanner controller

etthv

The E1701A analogue scanner card is a scanner and laser controller used in laser marking industry. It is the only modular scanner controller card worldwide and with the smallest ground-size out there and it is the only one which can be extended by additional boards providing different signals and outputs. So it is not necessary to buy one fully featured card and to pay for functions that are not needed. Via its extension boards only those functions and I/Os can be added, that are really required.
These extension boards are plugged onto baseboard. Several of them can be combined freely according to required functionality.

For more information or if you want to buy, please refer to halaser.eu

 

E1701A Baseboard is an analogue scanner card which can be extended by options described below and provides following features:

  • 16 bit analogue interface to scanhead with X and Y channel, ±5V and ±10V output
  • 3x 12 bit additional analogue outputs, 0..5V output
  • ILDA-capable interface
  • USB 2.0 and 100 Mbit Ethernet connection
  • online XY grid correction with support for several correction table file formats (like BeamConstruct HD .bco correction files, SCAPS™ .ucf, Scanlab™ .ctb and .ct5, Raylase™ .gcd, GSI/CTI™ .xml)
  • switching between up to 16 grid correction tables during marking process
  • 10 microseconds vector cycle time and resolution (microstep period)
  • command execution time down to 0,5 microseconds
  • realtime processing of laser and scanner signals
  • 26 bit internal resolution (for better quality also with 16 bit hardware output)
  • can control nearly every laser type (this may require extension boards as described below)
  • 512 MByte DDR3 RAM
  • 1 GHz CPU clock
  • support for Micro-SD and Micro-SDHC cards with up to 32 GByte disk space for stand-alone operations
  • internal command and vector data list with more than 17 million entries
  • continuous list concept, no need to swap between buffers
  • open source compatibility library that emulates existing programming interface for fast and easy usage with existing software (contains e.g. Scanlab™ RTC4™, SCAPS™ USC™/SCI and other compatible interfaces)
  • very small size of about 87 mm x 55 mm
  • shipped with easy to use connection kit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LP8 Extension Board requires E1701A baseboard as described above and provides additional signals for controlling lasers and external equipment. It offers following features and functions:

  • LP8 8 bit CMOS level parallel digital output e.g. for controlling laser power
  • LP8 latch CMOS level digital output for usage with IPG™ and compatible laser types
  • Master Oscillator CMOS level digital output for usage with IPG™ and compatible laser types
  • 8 bit 0..5V analogue output e.g. for controlling laser power
  • two laser CMOS level digital outputs for usage with YAG, CO2, IPG™ and compatible laser types (outputs can provide PWM frequency, Q-Switch, FPK-pulse, continuously running frequency, stand-by frequency), running with frequencies up to 20 MHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digi I/O Extension Board requires E1701A baseboard as described above and provides additional I/Os for controlling external equipment. It offers following features and functions:

  • 8 digital inputs and 8 digital outputs can be switched to opto-insulated mode with external power supply of up to 24 V
  • 2 inputs can be used for 90 degree phase-shifted encoder signal for marking on-the-fly applications
  • inputs can be used to select one of up to 256 stand-alone marking jobs stored on microSD card of baseboard

 

© ANDIS 2019. Design and programming by Soyamedia